GENERAL SPECIFICATIONS :
Power supply : 230Vac +-10%, 50Hz – maximum
protection 16A/2P
Insulation voltage : 3 KV tested
Characteristic consumption : 1,5VA
Ambient temperature :
Working temp. range : 10°C to 50°C
Storage temp. range : -10°C to 60°C
Maximum humidity : 93%, no moisture
condensation
Bus load : 10mA at nominal 13,8V
Internal fuse 500mAT single phase
Max installation altitude : 2.000m
OUTPUTS :
OUT1 – OUT4 : analog outputs 0-10V or 1-10V.
Each output can handle:
Max 5mA (source; 0-10V)
Max 100mA (sink; 1-10V)
PHYSICAL SPECIFICATIONS
Housing : Plastic, self-extinguishing according to
UL94-V0
Protection Degree : IP20, EN 60529
Installation : rapid mounting on DIN-RAIL, width
6 modules
Dimensions (HxWxL) : 62mm x 90mm x 107mm
Weight : approx. 0,321 kg
4 OUTPUTS 0/1-10V ANALOG DIMMER MODULE
The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.
Your custom content goes here. You can add the content for individual product
Related products
RELAY MODULE (2X 16A)
1 OUTPUT 0/1-10V ANALOG OUTPUT MODULE
The CTD Controller (Patent Pending) is the heart of your QBus system. The Controller controls and supplies power to all Qbus modules connected via the usual two-wire bus: flexible and easy to install. Each controller has an on-board SD memory card on which all actions that happen on the bus are stored. That data can be used by the Qbus EQOmmand software to visualize, predict and optimize energy consumption. Each CTD has a standard USB port to adapt your system to your liking in an easy way. Optionally, each controller can have an Ethernet port via which you can securely communicate with your controller over the internet.