Module which counts and processes pulses received from a pulse meter. Any pulse meter can be connected to the ECM04 as long as the contacts are potential-free. The ECM04 can receive a pulse every 250ms. Alarms can be triggered based on a set number of pulses, for example to receive green energy certificates every kW generated by solar panels.
ENERGY COUNTER MODULE
Module which counts and processes pulses received from a pulse meter. Any pulse meter can be connected to the ECM04 as long as the contacts are potential-free. The ECM04 can receive a pulse every 250ms. Alarms can be triggered based on a set number of pulses, for example to receive green energy certificates every kW generated by solar panels.
Your custom content goes here. You can add the content for individual product
Related products
REL04SA
Quick View
RELAY MODULE (4X 16A)
REL02SA
Quick View
RELAY MODULE (2X 16A)
ANA04
Quick View
4 OUTPUTS 0/1-10V ANALOG DIMMER MODULE
ROL02P
Quick View
2 UP/DOWN OUTPUTS 230V SHUTTER MODULE WITH POSITIONING
The CTD Controller (Patent Pending) is the heart of your QBus system. The Controller controls and supplies power to all Qbus modules connected via the usual two-wire bus: flexible and easy to install. Each controller has an on-board SD memory card on which all actions that happen on the bus are stored. That data can be used by the Qbus EQOmmand software to visualize, predict and optimize energy consumption. Each CTD has a standard USB port to adapt your system to your liking in an easy way. Optionally, each controller can have an Ethernet port via which you can securely communicate with your controller over the internet.
CTD01E
Quick View